Dry fog & Air Atomizing Spray nozzle operates with an external/Internal mix, which means the
atomization of the fluid takes place outside/inside the nozzle. When
there is an external mix, (as opposed to an internal mix), the
flow rate is not dependent on the air pressure, which results
in easier control. It is available for 1/4" 3/8" and 1/2"
pipe sizes and can be specified in a choice of standard materials
including nickel-plated brass, 304 or 316L or 310 Grd. stainless steel. The
nozzle can also be constructed from other materials to accommodate
demanding conditions.
Typical
applications of External Non Clogging Type include spray drying, where the fluid pressure
is typically lower and the fluid viscosities are typically higher.
Other applications for the dry fog nozzle include gas cooling
and coating foodstuffs. The versatility of the nozzle is demonstrated
by one of its more unique applications, injecting a viscous
liquid into a gas stream that contains powder particles in order
to coat the powder with the liquid.
Design Features of the Dry Fog Air Atomizing, Gravity Fed or Pressure Fed,
are Internal Mix, External Mix, Wide Round Spray Nozzle (Short Throw), Narrow Round Spray (Long Throw), Flat Fan Screen Jet, Double Head, 4 Head Type, 5 Head Type, 180 Degree Spray, 360 Degree Spray, Quill Head Type, Multi Jet Type are avilable fromour manufacturing ranges.
Special External
mix available, which allows spraying of viscous materials
Able to spray high viscosity (100+ cP) fluids where a round
spray pattern is required
Liquid flow rate is controlled only by the liquid pressure.
Liquid flow rate is not dependent on the air pressure making
the nozzle performance easier to control.
Variable atomization
Narrow spray angle (15° to 35°)
Wide spray angle (45 ° to 360°)
Precise metering of the liquid flow rate.
Discharge Flow Rate (50 ml/Min. to 3 LPM or Higher as per requirement.)